Name: Bell RS7 Helmets
Brand: Bell Racing Helmets
Availability: InStock

Bell RS7 Helmets

$899.95 – $1,999.95

Bell Helmet Size Guide

Proper helmet fit is vital to the performance of a helmet during an impact. For the helmet to perform properly during an impact, it must stay securely on the head.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.

A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.

Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use.

Standard Size	Hat Size	Inches	Centimeters
4XS	6-³/₈	20-¹/₁₆	51
3XS	6-¹/₂ to 6-⁵/₈	20-¹/₂ to 20-⁷/₈	52-53
2XS	6-³/₄ to 6-⁷/₈	21-¹/₄ to 21-⁵/₈	54-55
XS	7	22	56
S	7-¹/₈	22-³/₈	57
M	7-¹/₄ to 7-³/₈	22-³/₄ to 23-¹/₄	58-59
L	7-¹/₂	23-⁵/₈	60
XL	7-⁵/₈ to 7-³/₄	24 to 24-³/₈	61-62
2XL	7-⁷/₈ to 8	24-³/₄ to 25-¹/₄	63-64
3XL	8-¹/₈ to 8-¹/₄	25-⁵/₈ to 26	65-66
4XL	8-³/₈ to 8-¹/₂	26-³/₈ to 26-³/₄	67-68

Description

Based on the HP7 design and featuring a lightweight carbon composite or ultra-lightweight carbon fiber shell using Bell’s high-pressure proprietary molding system, the RS7 uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 is available in three versions: RS7, RS7 with Ear Cups, RS7 with Front Chin Bar Gurney. The RS7 Carbon that we carry is the RS7 with Ear Cups.

Features:

Lightweight carbon composite or ultra-lightweight carbon fiber shell.
High-Pressure Molding System for Improved Shell Strength.
Advanced Ventilation System with 14 Intake and Extraction Channels with Air Intake Covers.
Available in Ear Cup Configuration to Reduce Ambient Noise.
Hollow Synthetic Rubber Gasket Seal Ensuring that Air and Water Can’t Penetrate into the Helmet.
Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection.
Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds.
Adaptable for Closed Car Forms of Racing with Top Forced Air Inserts Including Eyeport, 8 Hole and 10 Hole Options to Improve Internal Ventilation When Used with Forced Air System (Sold Separately).
Integrated Channels in the Face Piece Offer Multiple Options to Install Integrated Drinking Tube Systems and Radio Microphone Systems.
Ultra Plush Grey Comfort-Max FR Interior Fabric for Improved Comfort and Superior Moisture Wicking Properties.
Narrow Size Eyeport.
SE07 3MM DSAF Shield (SV SE07 Pivot System) – Clear Shield.
Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance.
M6 Terminal Hardware for Head and Neck Restraint Devices.
Draw String Helmet Bag & Hex Wrench Included.
Snell SA2020 & FIA8859-2015 approved.

Accessories:

Takes Racing Optics 10237C (ROP10237C) Tear Offs.
Takes Bell SE07 3MM DSAF Shield.
Takes Bell SE07 SV Pivot Kit

Reviews (0)

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Bell RS7 Helmets” Cancel reply

You must be logged in to post a comment.

Item Inquiry

About Bell Racing Helmets

Bell began as a small auto parts store in a suburb of Los Angeles.

Growing under the leadership of Roy Richter, Bell became a leader in safety equipment for auto racing, motorcycling and bicycling. His commitment to creating great products through a close connection with the sport, along with his trust of and care for the people who worked for him, turned Bell from a one-man operation to one of the premiere safety helmet company in the world.

From Bell's first helmet manufactured in a garage behind Bell Auto Parts in 1954 under the leadership of Roy Richter, to the present line, they are constantly breaking new ground in safety and comfort technology innovations. They know that, as quick as the final flash of that checkered flag, the future soon becomes the past—so they don't look back, they keep pushing forward, searching for the next finish line, the next win in a long history of wins.

Their legacy continues today with the purpose of creating and producing state-of-the-art head protection.

Shipping & Delivery

Shipping Times

We ship same day if you place your order before 3:00PM PST on Monday through Friday (subject to part availability). If placed after 3:00PM it will be shipped the next business day. The map to the left shows shipping estimates for UPS Ground Shipping. Typically these shipping estimates are accurate but JOES does not guarantee these estimates, and if the estimate is not accurate it is up to the buyer to take the issue up with UPS.